5 Channel 5x200w Power Amp Amplifier Home Theater System
Audio Receiver Xlr Rca
USD $2,668.61
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
15593-MP Fast Free shipping On Selected Products 30 days money back Guaranteed Secure payments Guaranteed Excellent Customer Support STORE CATEGORIES
This is a high-performance, audiophile-grade multichannel home theater amplifier.
Rated at a full 200 watts per channel into 8 ohms and 300 watts per channel into 4 ohms, it is capable of driving the most demanding home theater systems and reproducing the most dynamic soundtracks, while also articulating all the subtle sonic details found in music.
Supercharge existing receiver or create the foundation of a no compromise home theater system.
The 200 watts per channel rating is measured with all three channels driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads.
Additionally, there is NO current limiting and there is no protection circuitry in the amplifier circuit path.
Even if the speakers' impedance drops to a low level, the amp is robust enough that the current is never limited.
High resolution audio delivers the best in music and movie soundtracks.
With a more than 120dB signal to noise ratio, the amp can clearly and accurately articulate the quietest portions, the loudest portions, and everything in between.
More efficient than Class A, this high end, audiophile grade amplifier utilizes a Class AB design.
Designed, engineered, and assembled in the United States of America.
Each amplifier channel gets its own set of transformer windings, and also its own storage capacitor. Essentially, each channel has its own power supply meaning if one channel gets maxed out, the other channels are not affected.
Double sided, glass epoxy boards. Metal film resistors built to 1% tolerances. Stringent quality to ensure each circuit board functions like the last and presents the maximum in sound fidelity.
These lightning fast, optically coupled circuits are designed to detect electrical shorts from either the speakers, speaker wire, or electrical outlet. If triggered, the circuit will disengage the output, protecting the amplifier. It will then sample the affected circuit every 10 seconds and will restore output when it is safe to do so. Unlike other designs where there is a fuse or relay in series with the output, which can raise the damping factor or modify the sound, protection circuitry monitors the signal actively, but does so optically from outside the circuit path.
Oversized heat sinks, instead of fans, are used to keep the amplifier as cool and as silent as possible.
Rugged chassis with a powder coated finish designed to resist scratches and prevent corrosion.
Choose between unbalanced RCA or balanced XLR inputs. The gold plated RCA jacks are mounted directly on the chassis, not on a separate internal circuit board. This allows for a firmer connection that won't loosen over time, or worse, break.
The amp is engineered with a soft start circuit that gradually powers up the unit, preventing the dreaded speaker thump, while also easing the load on household circuitry. Once fully powered, the circuit is removed from the signal chain to ensure maximum sonic clarity.
Full Specifications:
Number of Channels 5 EIA 1kHz Output Power at 8 Ohms* 250 watts EIA 1kHz Output Power at 4 Ohms* 375 watts FTC Full Bandwidth Output Power at 8 Ohms** 200 watts FTC Full Bandwidth Output Power at 4 Ohms** 300 watts Input Sensitivity for Full Rated Power 1.6 volts Frequency Response at Rated Output 20Hz to 20kHz ±0.1dB Phase Response +5 to -15 degrees from 20Hz to 20kHz at 1 watt Signal-to-Noise Ratio "A-Weighted" Greater than 120dB below rated FTC Full Bandwidth Power Total Harmonic Distortion (THD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz Intermodulation Distortion (IMD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz Toroidal Transformers 2 (1,025VA and 790VA) Total Capacitance 112,000µF (22,400µF per channel) Load Impedance Safe with all types of loads
Rated for 4 to 16 ohms Power Bandwidth FTC +0, -3dB from 5Hz ~ 100kHz Damping Factor Greater than 400 from 10Hz ~ 100kHz Crosstalk Greater than 100dB from 20Hz ~ 20kHz Gain Voltage gain of 28dB Slew Rate > 50V / µS Input Impedance 28 kilohms (nominal) Remote Trigger Voltage 3.3 ~ 24.0 VDC at 5mA or greater DC Output Offset Less than ±5mV Input Power 120 VAC (nominal) Chassis Dimensions 17.0" x 7.0" x 16.5" (432 x 178 x 419 mm)
About Us Payment Shipping Returns Contact Us
- Home & Garden
- Toys & Hobbies
- Business & Industrial
- Health & Beauty
- Sporting Goods
- Consumer Electronics
- Computers/Tablets & Networking
- Crafts
- Clothing, Shoes & Accessories
- Baby
- Cell Phones & Accessories
- Cameras & Photo
- Video Games & Consoles
- Jewelry & Watches
- Musical Instruments & Gear
This is a high-performance, audiophile-grade multichannel home theater amplifier.
Rated at a full 200 watts per channel into 8 ohms and 300 watts per channel into 4 ohms, it is capable of driving the most demanding home theater systems and reproducing the most dynamic soundtracks, while also articulating all the subtle sonic details found in music.
Supercharge existing receiver or create the foundation of a no compromise home theater system.
The 200 watts per channel rating is measured with all three channels driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads.
Additionally, there is NO current limiting and there is no protection circuitry in the amplifier circuit path.
Even if the speakers' impedance drops to a low level, the amp is robust enough that the current is never limited.
High resolution audio delivers the best in music and movie soundtracks.
With a more than 120dB signal to noise ratio, the amp can clearly and accurately articulate the quietest portions, the loudest portions, and everything in between.
More efficient than Class A, this high end, audiophile grade amplifier utilizes a Class AB design.
Designed, engineered, and assembled in the United States of America.
Each amplifier channel gets its own set of transformer windings, and also its own storage capacitor. Essentially, each channel has its own power supply meaning if one channel gets maxed out, the other channels are not affected.
Double sided, glass epoxy boards. Metal film resistors built to 1% tolerances. Stringent quality to ensure each circuit board functions like the last and presents the maximum in sound fidelity.
These lightning fast, optically coupled circuits are designed to detect electrical shorts from either the speakers, speaker wire, or electrical outlet. If triggered, the circuit will disengage the output, protecting the amplifier. It will then sample the affected circuit every 10 seconds and will restore output when it is safe to do so. Unlike other designs where there is a fuse or relay in series with the output, which can raise the damping factor or modify the sound, protection circuitry monitors the signal actively, but does so optically from outside the circuit path.
Oversized heat sinks, instead of fans, are used to keep the amplifier as cool and as silent as possible.
Rugged chassis with a powder coated finish designed to resist scratches and prevent corrosion.
Choose between unbalanced RCA or balanced XLR inputs. The gold plated RCA jacks are mounted directly on the chassis, not on a separate internal circuit board. This allows for a firmer connection that won't loosen over time, or worse, break.
The amp is engineered with a soft start circuit that gradually powers up the unit, preventing the dreaded speaker thump, while also easing the load on household circuitry. Once fully powered, the circuit is removed from the signal chain to ensure maximum sonic clarity.
Full Specifications:
Number of Channels 5 EIA 1kHz Output Power at 8 Ohms* 250 watts EIA 1kHz Output Power at 4 Ohms* 375 watts FTC Full Bandwidth Output Power at 8 Ohms** 200 watts FTC Full Bandwidth Output Power at 4 Ohms** 300 watts Input Sensitivity for Full Rated Power 1.6 volts Frequency Response at Rated Output 20Hz to 20kHz ±0.1dB Phase Response +5 to -15 degrees from 20Hz to 20kHz at 1 watt Signal-to-Noise Ratio "A-Weighted" Greater than 120dB below rated FTC Full Bandwidth Power Total Harmonic Distortion (THD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz Intermodulation Distortion (IMD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz Toroidal Transformers 2 (1,025VA and 790VA) Total Capacitance 112,000µF (22,400µF per channel) Load Impedance Safe with all types of loads
Rated for 4 to 16 ohms Power Bandwidth FTC +0, -3dB from 5Hz ~ 100kHz Damping Factor Greater than 400 from 10Hz ~ 100kHz Crosstalk Greater than 100dB from 20Hz ~ 20kHz Gain Voltage gain of 28dB Slew Rate > 50V / µS Input Impedance 28 kilohms (nominal) Remote Trigger Voltage 3.3 ~ 24.0 VDC at 5mA or greater DC Output Offset Less than ±5mV Input Power 120 VAC (nominal) Chassis Dimensions 17.0" x 7.0" x 16.5" (432 x 178 x 419 mm)
About Us Payment Shipping Returns Contact Us
Payment can be made by paypal.
(Not Selected)
We hope that you will be happy with your purchase. We will gladly accept returns within 30 days. Please contact our customer service representatives.
NEWSLETTERMembers receive an email when we have new items in stock and are first to know about our special promotions, don’t miss out!
click here to joinread more...
Store Pages- About Us
- Shipping
- Payment
- Returns & Exchange
- FAQs
- Contact Us
- Visit Shop
- Add to Favourite
- Store Newsletter
- Feedback
- Contact Us
Smart Box Systems © 2009-2021 . All Rights Reserved.
Price type
IN STOCK
OUT STOCK
.
